Harvia Cilindro HPC 11, 10.5kW 240 Volt Single Phase, Controller not included

Description

The Cilindro 11 requires digital Xeno CX30 control panel.
The Harvia Cilindro 11 floor mounted electric sauna heater is designed for home sauna rooms up to 636 adjusted cubic feet (ACF).
The Cilindro 11 creates an intense heat and provides a traditional Finnish sauna experience. The sauna oven is constructed of stainless-steel throughout and includes industrial-grade stainless steel heating elements. Its large 265-pound rock capacity ensures an even and consistent heat each bathing session.
The Cilindro 11 heater features a partially open outer casing in the front for optimal heat dispersal and efficiency. This unique construction enables bathers to control the intensity of the sauna heat by sprinkling water on the top or side of the pillar. Its narrow design allows the sauna unit to be installed by a side wall or in the corner of the room.
Harvia Cilindro sauna heaters are engineered for years of exceptional performance and maintenance-free operation. Harvia sauna heaters are made in Finland and are UL and ETL listed.
Features
Soft and plentiful steam
Stainless Steel housing
Stainless Steel elements
Elements run down center of heater
Side wall or Corner of room install
Available in 240V/1PH only
Not recommended for Commercial Use
Stone capacity 200 lbs.
Measures 15-1/2"w x 15"d x 45-1/4"h
Includes
Cilindro 11 heater
265 lbs. stones
Installation and operation manual
Limited warranty
PRODUCT SPECIFICATIONS
Model
Cilindro 11
Shipping Weight (Lbs.)
265 lbs
Minimum Adjusted Cubic Feet
317
Maximum Adjusted Cubic Feet
636
Kilowatt Rating (KW)
10.5 KW
Width In Inches
15-1/2"
Depth In Inches
15"
Height In Inches
45-1/4"
Features
Soft and plentiful steam
Stainless Steel housing
Stainless Steel elements
Elements run down center of heater
Side wall or Corner of room install
Available in 240V/1PH only
Not recommended for Commercial Use
Stone capacity 200 lbs.
Measures 15-1/2"w x 15"d x 45-1/4"h
Includes
Cilindro 11 heater
265 lbs. stones
Installation and operation manual
Limited warranty
PRODUCT SPECIFICATIONS
Model
Cilindro 11
Shipping Weight (Lbs.)
265 lbs
Minimum Adjusted Cubic Feet
317
Maximum Adjusted Cubic Feet
636
Kilowatt Rating (KW)
10.5 KW
Width In Inches
15-1/2"
Depth In Inches
15"
Height In Inches
45-1/4"